Autodesk AUTOCAD 2010 - PREVIEW GUIDE Guia do Utilizador descarregar pdf (Página 431)

100

101

Lesson: Creating an Angled Corner Between Two Objects ■ 417

Practice Exercise: Creating Chamfers

In this practice exercise, you draw an 8 x 6 rectangle

and create chamfers using the Chamfer command.

To draw the rectangle:

■ Begin the Rectangle command.

■ Click in the drawing window to specify the

first corner.

■ For the other corner, enter @8,6 and press

ENTER.

To make a 45 degree corner using the chamfer

command:

■ Begin the Chamfer command.

■ Right-click anywhere in the drawing. Click

Angle.

■ Enter 1 and press ENTER for the chamfer

length on the first line.

■ Enter 45 and press ENTER to specify the

chamfer angle from the first line.

■ Select the first corner then the adjacent

corner as indicated below.

■ Repeat until all 4 corners are chamfered.

■ Press ENTER to exit the chamfer command.

Note: You could have used the Distance option

and entered both distance lengths at 1 for the

same results.

To chamfer using the polyline option:

■ Draw another 8 x 6 rectangle (see #1).

■ Begin the Chamfer command.

■ See that the current chamfer length is 1

and the angle is 45 degrees.

■ Right-click anywhere in the drawing. Click

Polyline.

■ Select the rectangle.

■ All corners are chamfered.

1 2 ... 426 427 428 429 430 431 432 433 434 435 436 ... 459 460

Comentários a estes Manuais

Sem comentários

Autodesk AUTOCAD 2010 - PREVIEW GUIDE Guia do Utilizador Página 431

Comentários a estes Manuais